Addressing diffusion behavior and impact in an epoxy-amine cure system using molecular dynamics simulations.

To deepen understanding of diffusion-controlled crosslinking, molecular dynamics (MD) simulations are carried out by taking the diffusion image of 3,3'-diamino diphenyl sulfone (3,3'-DDS) and polyethersulfone (PES) with epoxy resin varying temperatures from 393.15 to 473.15 K over crosslinking conversion of 0-85%. The diffusion of PES and 3,3'-DDS into the bulk increased with increasing the temperature as a result of enhanced mobility of the molecules when the difference between the glass-transition temperature (Tg) and the curing temperature. Beyond the onset points of the converged crosslinking conversion ratio of 3,3'-DDS and PES, their diffusion properties are obviously restricted with crosslinking conversion ratio. At low crosslinking conversion ratios (> 10%), the diffusion coefficients of triglycidyl p-aminophenol (TGAP) were 1.1 times higher than those of diglycidyl ether of bisphenol F (DGEBF) because of the lower molecular weight of TGAP. On the other hand, the diffusion coefficients of TGAP decreased when the crosslinking ratio was up to ~ 60% because, compared with DGEBF, it had more functional groups available to react with the curing agent. At higher crosslinking ratios, the diffusion coefficients of both resins converged to zero as a result of their highly crosslinked structures.

Multilayered Composites with Modulus Gradient for Enhanced Pressure-Temperature Sensing Performance.

Highly sensitive and flexible composite sensors with pressure and temperature sensing abilities are of great importance in human motion monitoring, robotic skins, and automobile seats when checking the boarding status. Several studies have been conducted to improve the temperature-pressure sensitivity; however, they require a complex fabrication process for micro-nanostructures, which are material-dependent. Therefore, there is a need to develop the structural designs to improve the sensing abilities. Herein, we demonstrate a flexible composite with an enhanced pressure and temperature sensing performance. Its structural design consists of a multilayered composite construction with an elastic modulus gradient. Controlled stress concentration and distribution induced by a micropatterned structure between the layers improves its pressure and temperature sensing performance. The proposed composite sensor can monitor a wide range of pressure and temperature stimuli and also has potential applications as an automotive seat sensor for simultaneous human temperature detection and occupant weight sensing.

Tacky-Free Polyurethanes Pressure-Sensitive Adhesives by Molecular-Weight and HDI Trimer Design.

Polyurethane pressure-sensitive adhesives (PU-PSAs) with satisfactory tack, cohesion, and removability were newly developed through the synthetic process by reacting methylene diisocyanate, poly(ethylene glycol) (PEG), and a 1,4-butanediol chain extender based on the different HDI/HDI trimer ratios. The sticking properties of PU-PSAs depended on both the HDI/HDI trimer ratio and crosslinking-agent composition in the formulation. The molecular weight (MW) dependence of adhesion in PU-PSA was observed in the range of 1000 < Mn < 3000, suggesting that the increase in MW limits the pressure-sensitive adhesion of these samples. The differences in the crosslinking-density significantly affected the cohesion, adhesion, and tack in PU-PSA. The formulation of 50 wt.% 600PEG and 50 wt.% crosslinking-agent and an HDI/HDI trimer ratio of 1.0 led to the optimal balance between the adhesion and cohesion properties owing to the sufficient tack, high 180-peel strength, and good cohesion.

Upper Critical Field Based on a Width of ΔH = ΔB region in a Superconductor.

We studied a method of measuring upper critical field (Hc2) of a superconductor based on a width of ΔH = ΔB region, which appears in a superconductor that volume defects are many and dominant. Here we show basic concepts and details of the method. Although Hc2 of a superconductor is fixed according to a kind of superconductor, it is difficult to measure Hc2 experimentally. Thus, results are different depending on experimental conditions. Hc2 was otained by a theory on a width of ΔH = ΔB region, which is that pinned fluxes at volume defects are picked out and move into an inside of the superconductor when the distance between pinned fluxes is the same as that at Hc2 of the superconductor. Hc2 of MgB2 obtained by the method was 65.4 Tesla at 0 K, which is quite same as that of Ginzburg-Landau theory. The reason that Hc2 obtained by the method is closer to ultimate Hc2 is based on that Fpinning/Fpickout is more than 4 when pinned fluxes at volume defects of 163 nm radius are depinned, which means that the Hc2 is less sensitive to fluctuation. The method will help to find the ultimate Hc2 of volume defect-dominating superconductors.

A facile template-free strategy for synthesizing hydroxymethyl-poly(3,4-ethylenedioxythiophene) nanospheres.

Hydroxymethyl-poly(3,4-ethylenedioxythiophene)(PEDOT-OH) nanospheres self-assembled using physical blowing method, which continually used a syringe, were successfully formed through aqueous solution polymerization under the oxidative initiators. The effect of blowing on the morphological properties of PEDOT-OH was precisely evaluated based on the different amount of initiator. The concentration of ammonium persulfate might be a driving force in the self-assembly process to create the PEDOT-OH nanospheres. The electrical and electrochemical properties of the resulting nanospheres were also characterized using four-point probe and cyclic voltammetry.

Ultra-broadband optical parametric generation and simultaneous RGB generation in periodically poled lithium niobate.

We report on efficient collinear optical parametric generation (OPG) with gain band ranging from 1400 to 2600 nm in a 2 cm-long periodically poled lithium niobate (PPLN) crystal. Such an ultra-broad gain band was obtained by choosing the pump wavelength at 933 nm, at which the group-velocities of the signal and the idler match near the degeneracy point. High OPG efficiency was obtained by quasi-phase matching (QPM). The ultra-broadband OPG led to efficient collinear RGB generation from a single PPLN crystal at a fixed pump wavelength. The green and red beams were found to be originating from high-order QPM sum-frequency generation between the pump and selected frequencies in the OPG band, while the blue beam was high-order QPM second-harmonic generation of the pump.